Included in this set is a 4 fl.oz. plastic spray bottle of Decal Guy Application Solution & a Decal Guy silicone Squeegee.
Our Application Solution was created to make installing decals faster, easier and more economical.
When performing a wet application, we have the solution for you!
STEP 1.
Clean surface thoroughly with Decal Guy Application Solution and a
KITCHEN PAPER TOWEL. DO NOT USE OTHER
CLEANERS OR SOLVENTS.
STEP 2.
Spray surface again with Decal Guy Application Solution, peel
backing off decal and place on wet surface. (You may
also spray adhesive side of film). Note: Spray product
liberally; do not lightly mist, as this will create trapped
air bubbles.
STEP 3.
Position decal. Use Decal Guy squeegee to remove fluid,
using a very firm pressure and working from the center
out to the edges in all directions.
STEP 4.
Wait 2-3 minutes. Remove transfer tape.
Wipe surface with paper towel.
